puronics.profile

Filters

Compressed Air Filter

High Pressure Filters

Dryers

Accessories

FILTERS

Compressed air is one of the essential services in any industry. Unfortunately compressed air/gas contain a considerable amount of contamination which can have dratic effects on the equipment using it. In addition to this, there are contaminants such as hydrocarbon vapours(from unburnt fuels and industrial processes) and water vapour. All of these are drawn into the compressor and their concentration increase by the compression process. Inside the compressor, wear particles and lubricating oil are added to the air.

ISO 8573.1 QUALITY CLASSES

QUALITY CLASS	DIRT Particle size in Micron	WATER Pressure Dewpoint °C (ppm. vol.) at 7 bar g	OIL (including Vapour) mg/m²
1	0.1	- 70 (0.3)	0.01
2	1	- 40 (16)	0.1
3	5	- 20 (128)	1.0
4	15	+3 (940)	5
5	40	+7 (1240)	25
6	--	+10 (1500)	--

OPERATION CHARACTERISTICS:

	MS-PURONICS SYSTEM centrifugal moisture separator. For the removal of bulk oil/water from the compressed air system.

	Filter type SB: Pre-Filtration
	Sintered bronze filter element for the removal of pipe scales, bulk liquid, solid particles, dsut down to 5 micron. Ideal as prefilter before line filter(Filter element regenerable).

	Filter type PF: High Efficiency General Purpose Protection
	For the removal of particles down to 1 micron including coalesced liquid water and oil, dust, providing a maximum remaining oil aerosol content of 0.5mg/m³ @ 21°C

	Filter type UF: High Efficiency Oil Removal Filtration(High Efficiency filter element)
	For the removal of particles down to 0.01 micron including water and oil aerosols, dust, providing a maximum remaining oil aerosol content of 0.01mg/m³ (0.01 ppm) efficiency - 99.9999% @21°C(precede with Filter type PF).[Borosilicate glass micro fibres - filter media which actively repel oil and water to reduce pressure drop and running costs to an absolute minimum]

	Filter type AC: Activated Carbon Filtration
	For the removal of oil and vapour and hydrocarbon odours giving a maximum remaining oil content of < 0.003 mg/m³ (<0.003 ppm) (excluding methane) @ 21°C (precede with Filter type PF + UF)